Solutions
Industries
Real estate
Debt products
Insights
Resources
Company
Arrange a consultationStart an inquiry

Construction and development

A construction lender wants to trust the budget and see exactly how it will be repaid. We prepare both before a lender sees the project, structure the draws and reserves and take the request to lenders active in your property type.

A construction site from above

Where the structure matters most.

Construction finance works differently from a loan on a finished building. The lender advances money in stages as work is verified, sizes the loan against what the project costs rather than any income it earns today, and judges the request on two questions: can it be built for the budget, and how will the loan be repaid when it is done. The rhythm is the same for apartments, warehouses, a retail center, a hotel or a mixed-use scheme, even though the details change.

Lenders size the loan as a share of total cost (loan to cost, LTC) and test it against the finished value (loan to value, LTV). They usually require an interest reserve, money held back from the loan to cover interest until the project earns income, and a contingency for cost overruns. They also need confidence that, once complete, the building can be sold or refinanced into long-term debt that repays them. The contractor, the draw process and the developer’s backing for completion all form part of the discussion.

We act for the developer. We assemble the budget, the loan to cost and the case for the take-out in the form construction lenders expect, arrange the draw schedule and interest reserve, and approach banks, debt funds and specialist construction lenders among 2,588+ capital sources.

Four stages where developers call us.

Most construction requests start at one of these points.

Building from the ground up

New construction funded in draws, with the loan sized to the total cost of the project.

Heavy redevelopment

Stripping a building back to its frame, or reworking it on a scale a bridge loan cannot fund.

Setting draws and reserves

Agreeing the draw schedule, the interest reserve and the contingency the lender requires.

Planning the take‑out

Lining up the sale or the long-term loan that repays the construction debt on completion.

Lenders fund a plan they can follow from the first draw to the last.

We put the budget, the loan to cost and the take-out in front of construction lenders as one coherent case, then negotiate the draw and reserve terms on your side.

Is this the right route for your project?

If most of the first column describes your situation, a conversation is worth having.

Often a fit when

May not be the right path if

You are building from the ground up, or taking on a redevelopment larger than a bridge loan can fund.

You need an equity investor or joint-venture partner, not a loan.

You have a firm budget, committed equity and a realistic completion schedule.

Approvals, a settled budget or the equity are still missing.

There is a clear way to repay the loan on completion: a sale or a long-term refinance.

The finished property could neither be sold nor carry a long-term loan large enough to repay the construction debt.

You want draws, reserves and leverage set with the same care as the budget.

The schedule leaves no room for the time lenders need to review the budget and the contractor.

What a construction lender tests first.

Development underwriting is detailed. These five areas decide most requests.

A building site with a tower crane, seen from above

Whether the hard costs, soft costs and contingency are complete and believable.

How much of the total cost the loan covers, and how much equity sits ahead of it.

Your record of finishing similar projects, the general contractor and its contract, and who stands behind completion.

Whether the reserve pays the interest through construction and the lease-up that follows.

Whether a sale or long-term refinance can repay the loan, tested against the finished value and the income it will earn.

How development projects are usually financed.

Four structures account for most construction debt. The choice depends on the scale of the work and on whether you plan to hold or sell the finished property.

  1. 01
    Construction loanSenior debt advanced against verified progress, sized as a share of everything the project costs.
  2. 02
    Redevelopment bridgeCapital for heavier works than an ordinary bridge loan is designed to carry.
  3. 03
    Construction‑to‑permanent loanOne loan that funds the build, then rolls into long-term debt when the building is finished and stable.
  4. 04
    Mezzanine or subordinate debtA further layer of capital ranking behind the senior loan, where the stack needs one.

What a construction lender will ask to see.

Nothing here needs to be ready before we speak. Lenders will ask for most of it, and having it early makes every later step easier. Some items will not apply to your project.

0of 8 in hand

Select what you already have. You can start with none of it.

Nothing you select here is sent or stored.

Test the take‑out before the first draw.

The construction loan follows the budget; the take-out follows income. Enter the project’s projected net operating income (NOI) once stabilized to see how much long-term debt the finished building might support, by value and by income cover (debt service coverage ratio, DSCR). This tests the exit, not the construction loan itself.

$
%
%
x
%
years

Illustrative only. Sector defaults are rough starting points, not market quotes. Value is estimated by dividing income by the cap rate; lenders and appraisers set their own values, tests and terms.

Debt capacity

–

 

Implied value (NOI ÷ cap rate)
–
Loan by value
–
Loan by coverage
–
Sized loan
–
Test that sets the loan
–
Annual debt service
–

 

 

Nothing you enter is stored or sent.

Three projects, three ways to structure the build.

Situation

How an advisor‑led process helps

Illustrative path

Named tenantA developer has a signed lease with a regional distributor for a warehouse that has not yet been built.

We present the lease and the tenant’s credit alongside the budget, and test whether the lease supports a higher loan to cost.

Construction lenders that value pre-let projects compete for the loan, with the take-out sized against the signed lease.

Phased rentalA sponsor plans a rental community in three phases on one site, starting the second once the first is let.

We structure the first phase’s loan so later phases can follow without refinancing the whole site.

Lenders review a phased plan with release terms and a take-out for each completed phase.

Cost overrunHalfway through construction, a developer’s costs have risen and the existing loan will not cover the difference.

We size the shortfall, test subordinate capital against fresh equity and work with the existing lender on its consent.

Mezzanine lenders and the senior lender are brought to terms that let the build continue, subject to underwriting.

Illustrative situations only: not actual transactions or outcomes. Every financing remains subject to lender underwriting and approval.

What happens after you get in touch.

Three stages, and the first costs you nothing.

  1. 01

    Tell us about the project

    The site, the budget, the approvals, the equity in place and when construction should start. No cost and no credit pull to start.

  2. 02

    An honest read

    An advisor reviews it the way a construction lender will and tells you plainly what we think is achievable.

  3. 03

    To lenders, and to the close

    We prepare the package, run a competitive process among suitable construction lenders and negotiate through to closing.

Other routes developers weigh.

All property types

Property type

Mixed‑use property

Developments that combine apartments, shops and offices.

Explore mixed-use

Questions developers ask about construction.

If yours isn’t here, ask us directly. A first conversation costs nothing.

Speak with an advisor

Mostly against what the project will cost to build, measured as loan to cost, then checked against the finished value and the strength of the take-out. Lenders advance funds in stages as work is verified, and usually require an interest reserve and a contingency. The model on this page tests the take-out side of that discipline.

Because the building earns nothing while it is being built. The reserve is money held back from the loan to meet interest through construction and the lease-up that follows. Sized too small, it can leave a project short of funds before completion, so lenders examine it closely.

It rarely needs to be signed, but a credible exit is essential. Some projects arrange a separate long-term loan once the building is stable; others use a construction-to-permanent loan, which rolls into long-term debt at completion. Either way, the lender wants evidence that the completed building can be sold, or carry enough long-term debt, to repay it.

Banks, debt funds and specialist construction lenders, each with its own preferences on property type, location and developer experience. Finding the ones interested in your project, on a structure that suits it, is the core of our work.

That is what the contingency is for, and why lenders test it. If an overrun exceeds it, the usual options are more equity, subordinate debt or a revised budget agreed with the lender. The earlier a shortfall is raised, the more options remain open.

No. We advise and arrange; lenders underwrite, set terms and fund. We prepare the request, bring suitable lenders into competition and negotiate for you. Every offer is the lender’s own and depends on its underwriting and approval.

A success fee, earned only when your financing closes. No retainer and no upfront fee. Costs a lender requires (appraisals, reports, legal) are paid to those providers directly.

A network built around the borrower.

Every construction financing goes to lenders chosen for that project, from a network that spans banks, credit unions, debt funds, specialist construction lenders and private credit.

$353M+Financing arranged
2,588+Capital sources in our network
217+Borrowers advised
45States served

Tell us about the project.

Marlmont Capital advises borrowers on commercial debt, and only borrowers. Before anything goes to a lender, we learn the transaction, define the capital it needs and choose the debt route that fits.

Your first conversation

Send a few details and an advisor will arrange a call of about 30 minutes. No cost and no credit pull to start.

Reviewed by an advisorNo upfront obligationNo credit pull to start

Marlmont Capital is a debt advisory firm. It advises borrowers and arranges financing from third-party lenders; it is not a lender and does not offer securities or investment, tax or legal advice. Financing is subject to lender underwriting, diligence and approval, and terms are set by the lender. Figures and examples on this page are illustrative and are not a quote, offer or commitment.