Solutions
Industries
Real estate
Debt products
Insights
Resources
Company
Arrange a consultationStart an inquiry

Capital stack guide

Most commercial financings draw on several kinds of capital, each with its own place in the queue for repayment. Once you know the order, and the reason each layer is priced as it is, you can choose the mix with confidence and know what to negotiate.

A crane beside a blue glass block

The stack, in plain terms.

The capital stack is all the money behind a transaction, arranged by who is repaid first. Senior debt sits at the base: it is repaid before anything else, carries the least risk and costs the least. Common equity sits at the top: it is repaid last, absorbs the first loss and keeps whatever upside remains. Everything in between is priced by where it falls in that order.

A straightforward purchase may need only two layers, a senior loan and the owner’s equity. A larger acquisition, a development or a recapitalization may slot a middle layer, mezzanine debt or preferred equity, between the two, raising the total proceeds so that less common equity is needed.

Seen from the borrower’s chair, building a stack means making trade-offs. More senior debt is cheaper but brings tighter limits on value and coverage; a subordinate layer adds proceeds at a higher cost, with terms between the capital providers to settle. We put together the combination that suits your plan and run each layer competitively, so that every part of it is priced and negotiated for you.

Four ideas to take into any financing.

Every stack is different, but the same principles decide how it is built and what it costs.

  1. 01
    Priority sets the priceThe order of repayment decides who carries the risk, and so what each layer can charge.
  2. 02
    Each step up costs moreSenior debt is the cheapest money in the stack. Add higher layers on purpose, knowing what each one costs.
  3. 03
    Terms count as much as rateCovenants, cash sweeps and the agreements between lenders can shape a deal as much as the interest rate.
  4. 04
    Build to the planThe right mix follows how long you will own the asset, what you plan to do with it and how you will leave, and each layer is best tested in competition.

Where capital sits decides what it costs.

A dollar of senior debt and a dollar of mezzanine debt can pay for the same building at very different prices. Knowing why tells you where to stop adding debt and where it still pays.

A steel building frame under construction beside a crane

Design the stack your transaction needs.

Understanding the layers is the first step. Combining them for a particular deal, and making capital sources compete at each level, is the work we do for borrowers. No cost and no credit pull to start.

What sets the price of each layer.

Three forces set the price of every layer: its position, the benchmark beneath it and the limits lenders apply.

Position sets the price

Capital is priced for the risk it carries, and in a stack that risk follows position. The senior lender has the first claim on the asset and is paid ahead of every other layer, so if the asset had to be sold in a downturn its money would come back first. It accepts the lowest return for that protection. Each layer above it is paid only after those beneath, carries more risk and asks a higher return.

So the same amount of money can cost very different sums depending on where it sits. In an illustrative case, raising total debt from 60% of value with a senior loan alone to 80% with mezzanine debt on top buys those extra proceeds at a much higher rate: if the asset lost value, the upper slice would feel it before the senior loan did.

A benchmark first, a spread on top

Every debt layer is priced over a public benchmark. Floating-rate senior and bridge loans are usually quoted over Term SOFR, the forward-looking version of the Secured Overnight Financing Rate; long-term fixed loans are priced over the Treasury yield of a similar term. The benchmark is the same for everyone. The spread above it reflects the asset, the leverage, the sponsor and the lender’s appetite, and it is the part a competitive process can improve.

Mezzanine debt and preferred equity are judged on their total return rather than a single coupon: often a current rate paid in cash, plus interest that accrues until repayment or a share of the upside. Our debt products pages explain each instrument in detail.

Leverage, coverage and control

How much each layer can provide is governed by the tests lenders always apply: a value test, loan to value (LTV) or loan to cost (LTC), and a cash-flow test, the debt service coverage ratio (DSCR). The senior lender sets its limits first, and any subordinate layer fits in the room that remains. You can try the trade-offs in our financing calculator.

Beyond price, every layer comes with rights: covenants, cash sweeps, approval rights and, where there is more than one lender, an intercreditor agreement setting out who may act and when. Negotiating those terms is often worth as much as the rate, and it is a central part of structuring the stack for the borrower.

Who is repaid, and in what order.

Repayment runs from the base of the stack upward, and risk and cost rise with each step. The layers are shown from the top, as stacks are usually drawn.

LayerPlace in lineSecured byRelative costWhen borrowers use it
Common equityRepaid last; takes the first lossOwnership itselfHighest: the residual returnAlways: the sponsor’s own capital, which every other layer relies on
Preferred equityAfter all debt, before common equityRights in the ownership agreement, not a lienAbove mezzanine debtWhen more debt is unavailable, or would break the senior loan’s terms
Mezzanine debtAfter the senior loanUsually the shares or membership interests in the owning companyAbove senior debtTo raise proceeds above the senior loan and reduce the equity needed
Senior debtRepaid firstA first lien on the assetLowestIn almost every financing: the base the rest of the stack is built on

Illustrative. Every stack is designed around its own transaction, and each lender and investor sets its own terms.

Compose a stack and see its blended cost.

Set the total capital the transaction needs, then the share and rate of each layer. The model shows what each layer contributes, the common equity left and the blended cost of the debt.

$
Senior loanFirst lien, the lowest cost
%
%
Stretch senior or second lienExtra senior proceeds, or a second mortgage
%
%
MezzanineTypically secured on the ownership interests
%
%
Preferred equityPaid a preferred return before common equity
%
%

Illustrative only. A stack sketched to compare layers, not a structure any lender has offered. Rates are weighted by size, preferred equity’s rate is its preferred return, and fees and intercreditor terms are left out.

Blended cost of the debt layers

–

 

Senior loan
–
Stretch senior or second lien
–
Mezzanine
–
Preferred equity
–
Common equity
–
Blended cost through preferred equity
–

 

 

Nothing you enter is stored or sent.

Read further.

All resources

Debt products

Every instrument in the stack

Senior, bridge, construction, mezzanine, private credit and more, explained one by one.

Compare debt products

Resource

Financing calculator

Size the senior loan an income and a value can support.

Open the calculator

Resource

Glossary

Plain definitions of the terms in this guide, and many more.

Browse the glossary

From the guide to your own stack.

Three stages, and the first is a conversation.

  1. 01

    Tell us about the transaction

    What you are financing, the capital you have, the capital you need and the timetable. No cost and no credit pull to start.

  2. 02

    A structure designed for you

    An advisor sets out the layers the deal can carry, what each is likely to involve and where the trade-offs sit.

  3. 03

    Each layer to market

    We approach suitable capital sources for each part of the stack, compare their terms and negotiate through to the close.

Questions about the capital stack.

Something else on your mind? Ask an advisor. No cost and no credit pull to start.

Speak with an advisor

The full set of money behind a transaction, ordered by who is repaid first. Senior debt sits at the base, repaid first and priced lowest. Mezzanine debt and preferred equity may sit in the middle. Common equity sits at the top, repaid last and earning what remains. That order of payment is often called the waterfall.

Because it carries the least risk. The senior lender has the first claim on the asset and is paid ahead of every other layer, so in a sale after a default it is repaid in full before anyone else sees a dollar. Every layer above it waits for those below and asks a higher return for that wait and that risk.

When you want more total proceeds than the senior loan alone will provide, usually to commit less common equity to an acquisition, a development or a recapitalization. The extra money costs more, because it would take a loss before the senior loan, and it brings agreements between the capital providers that need careful negotiation.

Mezzanine debt is a loan, usually secured on the ownership interests in the company that owns the asset, with interest and a maturity date. Preferred equity is an ownership stake with a set return paid before common equity, and its rights sit in the ownership agreement rather than in a lien. Senior lenders treat the two differently, and the right choice depends on what the senior loan allows.

The same two tests apply throughout: a value test (loan to value or loan to cost) and a cash-flow test (debt service coverage). The senior lender sizes its loan first, and subordinate layers fit within the total leverage and coverage the deal can bear. Our financing calculator lets you test the senior loan an income and a value can support.

The contract between a senior lender and a subordinate lender that sets out their rights: who is paid when, what the junior lender may do if the borrower defaults and how long it must wait before acting. Its terms affect the borrower’s flexibility, so we negotiate it as carefully as the loans themselves.

No. We advise and arrange; lenders underwrite, set terms and fund. We design the stack and approach suitable capital sources for each layer, and every offer depends on that provider’s own underwriting and approval.

Tell us about the stack you are building.

Marlmont Capital advises borrowers on commercial debt, and only borrowers. Before anything goes to a lender, we learn the transaction, define the capital it needs and choose the debt route that fits.

Your first conversation

Send a few details and an advisor will arrange a call of about 30 minutes. No cost and no credit pull to start.

Reviewed by an advisorNo upfront obligationNo credit pull to start

This guide explains common structures in general terms. It does not give investment, tax or legal advice. Its structures and figures are illustrative. Marlmont Capital is a debt advisory firm, not a lender. Each lender decides whether to lend, and on what terms, after its own underwriting and diligence.