Solutions
Industries
Real estate
Debt products
Insights
Resources
Company
Arrange a consultationStart an inquiry

Glossary

The vocabulary of commercial debt, defined plainly. These are the words you will meet in a term sheet, in a lender’s questions and on a closing checklist, explained from the borrower’s side.

A working vocabulary for a financing.

Lenders use a shorthand of their own, and term sheets are written in it. This glossary covers the words a borrower actually meets: the ratios lenders use to set a loan amount, the instruments that make up the capital stack and the terms that shape a financing once it is agreed.

Where a term hides a trade-off, we say so. To see how the pieces fit together, read our capital stack guide, and to try the numbers yourself, use the financing calculator. Definitions are general and simplified, and an individual lender may use a term in its own way.

Knowing the words is the start.

A term sheet is easier to read when the vocabulary is clear. Negotiating one in your favor is our work. Tell us about the transaction and we will show you what its terms mean for you.

A

Advance rate
The share of a piece of collateral’s value that a lender will lend against. It is usually high for receivables owed by creditworthy customers and lower for inventory, which takes longer to turn into cash.
Amortization
Paying down a loan’s principal gradually through regular installments. A longer amortization period means smaller payments, which also lets the same income support a larger loan, even when the loan matures well before it is fully repaid.
Appraisal
An independent valuation of a property, commissioned by the lender and usually paid for by the borrower. It sets the value against which the loan to value limit is measured.
Asset-based lending (ABL)
A revolving line of credit, sometimes paired with a term loan, sized to a company’s receivables, inventory and other assets through a borrowing base, so that availability rises and falls with those assets. See asset-based lending.

B

Bad-boy carve-outs
Exceptions to a non-recourse loan that make the borrower or a guarantor personally liable if certain acts occur, such as fraud, misusing the property’s cash or a voluntary bankruptcy filing. They are standard, but their scope can be negotiated.
Balloon payment
The large final payment due at maturity when regular installments have not repaid the whole loan. It is usually met by refinancing or by selling the asset, which is why maturity dates drive so much refinancing.
Basis point (bp)
One hundredth of a percentage point. Spreads and changes in rates are quoted this way: 50 basis points is 0.50%.
Borrowing base
The calculation that sets how much can be drawn on an asset-based line: the lender takes each class of qualifying collateral, applies its advance rate and adds up the results. It is recalculated as the collateral changes, often monthly or more often.
Bridge loan
Short-term debt that carries a borrower through a transition, such as an acquisition, a renovation or a lease-up, until long-term financing or a sale repays it. It is priced above permanent debt because it moves faster and bends further. See bridge debt.

C

Capital stack
Every layer of money behind a transaction, in the order it is repaid: from senior debt, repaid first, up to the owner’s common equity, repaid last. See our capital stack guide.
Cap rate (capitalization rate)
The yield a buyer accepts for owning a property: its net operating income as a share of its value. When cap rates rise, the same income supports a lower value, which can leave an existing loan larger than a new lender will refinance.
Cash-out refinance
A refinancing that borrows more than the loan it replaces, releasing equity as cash for the owner to use elsewhere, within the new lender’s leverage and coverage limits.
Cash sweep
A clause that sends some or all surplus cash flow to paying down the loan, often switched on when coverage or another test falls below an agreed level.
Collateral
The assets pledged to secure a loan, which the lender may claim if the borrower defaults: property, equipment, receivables, inventory or ownership interests. Collateral that is easier to value and sell generally earns higher advance rates and better pricing.
Commitment letter
A lender’s formal offer to make a loan on stated terms, issued after underwriting and credit approval. It is firmer than a term sheet, although its conditions must still be met before closing.
Construction loan
A loan released in draws as a building goes up, against an agreed budget. It is usually floating-rate and interest-only, and it is repaid by permanent financing or a sale once the property is complete and leased. See construction loans.
Covenant
A promise in the loan agreement that the borrower must keep for the life of the loan. Financial covenants set limits such as a minimum coverage ratio or a maximum leverage; others cover reporting and what the borrower may or may not do. Breaking one can put the loan in default.

D

Debt service
The principal and interest a borrower must pay over a given stretch of time, usually a year. Lenders compare annual debt service with income to test coverage.
Debt service coverage ratio (DSCR)
Net operating income divided by annual debt service. At 1.25x, income is a quarter more than the payments. Lenders set a minimum, and on many loans it limits the amount before the value test does.
Debt yield
Net operating income for a year, measured against the size of the loan and shown as a percentage. Because it takes no account of the rate or the amortization, many real estate lenders use it as an extra floor alongside loan to value and coverage.
Default
A failure to meet the terms of a loan: a missed payment, a broken covenant or another event the agreement defines. It gives the lender the remedies set out in the loan documents, which can include demanding repayment in full.
Defeasance
A way to prepay some fixed-rate loans, especially securitized ones: the borrower buys government securities whose payments match the rest of the loan, and these replace the property as the lender’s security. It can be expensive when rates have fallen.
Draw
A release of loan money in stages rather than all at once, usually against completed work or paid invoices. Construction loans are funded this way, with each draw checked against the budget and progress on site.
Due diligence
The checks a lender, or a buyer, makes before closing: reports on the property, reviews of financial statements, leases, title and legal documents, and background checks on the borrower.

E

EBITDA
Earnings before interest, taxes, depreciation and amortization: a common measure of an operating company’s cash earnings. Lenders to businesses often size debt as a multiple of it and test coverage against it.
Equity
The owner’s own money in a transaction. It takes the first loss and keeps whatever is left after every lender is repaid, which makes it the costliest money in a transaction.
Extension option
A right written into a loan to push back the maturity for a set period if agreed conditions are met, usually a fee and a minimum coverage or debt yield. Common on bridge and construction loans.

F

Factoring
Selling invoices to a third party, the factor, at a discount in return for cash now. Unlike a loan, the factor buys the invoices and usually collects payment from the customers itself. See factoring.
Fixed and floating rates
A fixed rate stays the same for the term of the loan. A floating rate moves with a benchmark, usually SOFR, and resets as it changes. Floating debt gets cheaper when rates fall but leaves the borrower exposed when they rise; fixed debt buys certainty and is priced off longer-term Treasury yields.

G

Guaranty
An undertaking by someone other than the borrower, frequently one of its owners, to repay the loan if the borrower cannot. Whether it comes from a person or a company, it extends the lender’s reach beyond the collateral. See also recourse.

I

Intercreditor agreement
The contract between two lenders in the same stack, typically a senior and a mezzanine lender, that sets their rights: the order of payment, what the junior lender may do after a default and how long it must wait. It matters to the borrower because it limits flexibility under both loans.
Interest-only (I/O)
A loan, or a stretch of a loan, on which the borrower pays interest but no principal. Payments are lower and coverage stronger during that time, but the balance stays where it started.
Interest rate cap
A contract, often required on floating-rate loans, that pays out if the benchmark rises above an agreed level, putting a ceiling on the interest cost. The borrower buys it at the start of the loan.
Interest reserve
Loan money held back to cover interest payments while a property earns little or no income, typical on construction and heavy renovation loans.
Invoice financing
Borrowing against unpaid invoices while the business keeps collecting from its own customers, often without those customers being told. See invoice financing.

L

Letter of intent (LOI)
A short, usually non-binding outline of a proposed deal. In a purchase it records the price and main terms before the contract is drafted; in a financing it is sometimes used in place of a term sheet.
LIBOR (London Interbank Offered Rate)
The benchmark U.S. floating-rate loans were priced over for decades, now retired and replaced by SOFR. It still appears in older loan documents.
Lien
A lender’s legal claim on an asset that secures its loan. A first lien is paid before any other claim on that asset; a second lien ranks behind it.
Loan to cost (LTC)
The loan measured against everything a project costs: land, construction and soft costs. Construction and value-add lenders use it in place of loan to value, because there is not yet a stabilized value to measure against.
Loan to value (LTV)
The loan measured against the asset’s appraised value. The highest figure a lender will accept depends on the asset type, the market and the lender.

M

Maturity
The date on which a loan must be repaid in full. If the regular payments have not cleared the balance, the remainder falls due as a balloon payment.
Maturity wall
A large volume of loans falling due within a short period. Where those loans were made at lower rates or higher values, many need fresh equity or a new structure to refinance.
Mezzanine debt
Subordinate debt that sits above the senior loan to raise total proceeds, usually secured on the ownership interests in the borrowing company rather than on the property. It costs more than the senior loan, since it is repaid later and secured less directly. See mezzanine debt.
Mini-perm
A medium-term loan, often three to five years, that carries a newly completed or recently stabilized property until long-term permanent financing makes sense.

N

Net operating income (NOI)
What a property earns once its running costs are paid, before debt payments, depreciation and major capital spending. It is the income that pays the loan, and dividing it by a cap rate gives an indication of value.
Non-recourse
A loan the lender can recover only from the collateral, not from the borrower’s other assets, apart from the bad-boy carve-outs. Common on stabilized commercial property, and priced for the extra risk the lender takes on.

O

Origination fee
A fee a lender charges for making a loan, usually a percentage of the amount and paid at closing. It belongs in any comparison of cost alongside the rate.

P

Permanent financing
Long-term debt, often at a fixed rate, on a property that is stabilized and producing income. It usually repays a construction or bridge loan. See permanent loans.
Points
Lender fees expressed in percentage points of the loan amount: two points on a $10M loan is $200,000. Paid when the loan is made and sometimes when it is repaid, they push the real cost of borrowing above the stated rate.
Preferred equity
An investment in the ownership of a deal that earns a set return before common equity is paid, but after all debt. Used when more debt is unavailable or unwanted; its rights are written into the ownership agreement.
Prepayment penalty
What a lender charges if a loan is paid off before an agreed date, protecting the return it expected. It may be a declining percentage, yield maintenance or defeasance. If you may sell or refinance early, it is one of the most important terms to negotiate.
Prime rate
The base rate U.S. banks use for many business loans, by convention three percentage points above the top of the Federal Reserve’s target range for the federal funds rate. Lines of credit and government-backed small business loans often float over it.

R

Rate lock
A lender’s agreement to hold a fixed rate, or the spread over a benchmark, between application or commitment and closing, sometimes in return for a fee or deposit.
Recapitalization
Changing the mix of debt and equity behind an asset or a business, by bringing in new capital or replacing existing layers, often to return money to owners, fund growth or meet a maturity without selling.
Recourse
How far a lender can go beyond the collateral to recover a loan, for example against a guarantor’s other assets. Loans range from full recourse to non-recourse, and their pricing reflects where the risk sits.
Refinancing
Paying off a current loan with a new one, whether to cut the cost, extend the term, change the structure or raise cash. See refinancing.

S

SBA loan
A loan made by a bank or another lender and partly backed by the U.S. Small Business Administration, which can allow longer terms or a smaller down payment for businesses that qualify. The 7(a) and 504 programs are often used to buy or refinance owner-occupied property.
Secured Overnight Financing Rate (SOFR)
The main U.S. benchmark for floating-rate loans, published each business day by the Federal Reserve Bank of New York and based on overnight borrowing secured by Treasury securities. Commercial loans are usually priced as Term SOFR plus a spread.
Seller note
Part of the purchase price that the seller agrees to receive later, with interest, rather than at closing. It reduces the cash or senior debt a buyer needs, and the senior lender will usually require it to rank behind its own loan.
Senior debt
The loan with the first claim on the collateral and first call on repayment, usually the largest and cheapest layer in the stack. Its limits on leverage and coverage shape everything above it. See senior debt.
Sources and uses
A two-column table for a transaction: every source of money on one side (each layer of debt, and the equity) and every use on the other (the price, costs, reserves and fees). The columns must total the same.
Spread
The margin a lender adds to a benchmark to set the interest rate, for example SOFR plus 3.00%. It reflects the asset, the leverage and the borrower, and it is the part of the rate that competition between lenders can move.
Stabilized
Describes a property operating at the occupancy and income expected over the long term, after construction, lease-up or renovation. Permanent lenders generally lend only against stabilized income.

T

Take-out financing
The loan that repays a shorter-term one, such as permanent debt replacing a construction or bridge loan. Short-term lenders want to see a credible take-out before they lend.
Term
The time until a loan matures. It can be much shorter than the amortization period, which leaves a balance to refinance or repay at maturity.
Term sheet
A lender’s outline of the loan it proposes, covering the amount, rate, term, structure and main conditions, issued before full underwriting and usually not binding. A competitive process aims to produce several and then improve them.
Term SOFR
A forward-looking rate for periods such as one, three or six months, derived from trading in SOFR futures. Many floating-rate commercial loans use it as their benchmark.
Treasury yield
The return on U.S. government debt of a given maturity, set by trading in the bond market. Long-term fixed-rate loans are usually priced as a spread over a Treasury yield of similar term.

U

UCC filing
A public notice, filed under the Uniform Commercial Code, that a lender holds a security interest in a business’s assets, such as equipment, receivables or inventory.
Underwriting
The lender’s own analysis of the sponsor, the property or company being financed, market conditions and the financial projections. It determines whether a loan is made, its size and its conditions, and every financing depends on it.
Unitranche
A single loan in place of separate senior and subordinate layers, with one blended rate and one agreement. Common in private credit, it leaves the borrower dealing with one lender.

V

Value-add
A plan to buy a property that can earn more after renovation, repositioning or better management. It is usually financed with short-term debt and refinanced once the higher income is in place.

W

Waterfall
The order in which cash from an asset or a sale is paid out: lenders first, in order of seniority, then preferred equity, then common equity.
Working capital
The money a business needs to run from day to day: broadly, what it is owed and holds in stock, less what it owes in the short term. It is financed with lines of credit, asset-based facilities or receivables finance. See working capital.

Y

Yield maintenance
A prepayment charge that pays the lender the interest it would lose if a fixed-rate loan were repaid early, preserving the return it expected. Common on permanent loans, and potentially large when rates have fallen.

Put the vocabulary to use.

All resources

Resource

Capital stack guide

How the layers in these definitions fit together, and why each is priced as it is.

Read the guide

Resource

Borrower FAQ

Plain answers on fees, the process and how lenders decide.

Read the FAQ

From the right words to the right terms.

Three stages, and the first costs you nothing.

  1. 01

    Tell us what you are financing

    The asset or business, the amount, the collateral and the timetable. No cost and no credit pull to start.

  2. 02

    A read on your terms

    An advisor explains what lenders are likely to look for and which terms will matter most for your financing.

  3. 03

    To lenders, and to the close

    We prepare the package, run a competitive process among suitable capital sources and negotiate the terms through to funding.

Tell us what you are financing.

Marlmont Capital advises borrowers on commercial debt, and only borrowers. Before anything goes to a lender, we learn the transaction, define the capital it needs and choose the debt route that fits.

Your first conversation

Send a few details and an advisor will arrange a call of about 30 minutes. No cost and no credit pull to start.

Reviewed by an advisorNo upfront obligationNo credit pull to start

These definitions are general and simplified, for information only. They are not advice on investment, tax, legal or financial matters. Lenders use some terms differently. Marlmont Capital is a debt advisory firm, not a lender. Each lender decides whether to lend, and on what terms, after its own underwriting and diligence.